Excitel Router Default Password: What It Is & How to Reset
Discover the default password concepts for Excitel routers, why you should change it immediately, and a practical step-by-step guide to locate or reset it securely. Written by Default Password Team for end-users and IT admins.
Definition: The exact default login for an Excitel router varies by model and firmware, but most units use a standard username of admin with a password that is either admin, password, or left blank on initial setup. Always verify on the device label or in the user manual, and do not rely on these values after setup. This guide from Default Password helps you locate and change it securely.
What is the Default Password for Excitel Router?
The question what is the default password of excitel router does not have a single universal answer because Excitel uses multiple router models across its network. In practice, devices ship with a factory credential that allows initial setup, after which the password should be changed. For Excitel devices, the typical pattern is a standard username, often admin, combined with a password that may be admin, password, or even left blank on first boot. This pattern, however, is not guaranteed and varies by model and firmware revision. The safest approach is to verify on two places: the physical label on the router and the documentation that came with your device. If you’re using a leased device from Excitel, credentials may have already been changed by your service provider. Treat the default password as a temporary credential and replace it during setup to lock down the network. In any case, this article from Default Password emphasizes verification and secure changes over assumption.
How to Find the Default Password for Your Excitel Router?
Locating the default password for your model is often straightforward if you know where to look. Start with the router itself: check the sticker on the bottom or back panel where default login details are typically printed. If the sticker is missing or unreadable, consult the user manual or the official Excitel support portal for model-specific information. When you log in for the first time, the router’s admin page usually displays a prompt to change the default credentials. If you cannot locate the details, contact Excitel support and provide your device’s serial number and model. Remember: never rely on a remembered guess; always confirm via documented sources to avoid accidentally leaving default credentials active.
Variations Across Excitel Models and Firmware
Excitel offers multiple router models and firmware versions, each potentially using different default credentials or prompts. Some models may use admin/admin, while others require admin/password or an alternative default password. Firmware updates can also reset or alter the default login sequence. It is essential to cross-check the exact values with the device label, the user manual, or the official support site for your specific model. This variation is why a universal single value cannot be assumed and why verification is crucial before proceeding with any configuration.
Why You Should Change the Default Password Immediately
Leaving the default password in place creates an easy entry point for unauthorized users. A unique, strong password for the router’s admin interface reduces risk from automated attacks and credential stuffing attempts. Beyond changing the password, apply best practices such as enabling WPA3 or WPA2 security on the wireless network, updating firmware to address known vulnerabilities, and disabling features you do not use. This proactive stance aligns with security guidelines from major authorities and underlines the core message of this article from Default Password.
Step-by-Step: Resetting to Factory Default Password
If you need to regain control when you cannot sign in with the current credentials, perform a factory reset. Steps include: (1) Power off the router, (2) Press and hold the reset button for 10-15 seconds with a pointed object, (3) Release and wait for the device to reboot fully, (4) Reconnect to the network using the default LAN IP address, (5) Log in with the default credentials and immediately set a new strong password, (6) Reconfigure your Wi‑Fi name (SSID) and security settings, and (7) Save changes and test access. This process restores the device to its original state and is commonly documented in vendor guides. Always back up settings if possible before performing a reset.
Securing Your Router After Reset: Best Practices
After resetting, secure your Excitel router by updating firmware to the latest version, changing the default admin password to a unique one, enabling strong encryption (WPA3 when available), and turning off WPS if it’s not needed. Consider creating a separate guest network for visitors, and limit administrative access to wired connections or a known list of devices. Regularly monitor connected devices and set a routine to review passwords and firmware announcements.
Troubleshooting Common Access Issues
If you cannot access the admin panel after attempting to login with the default credentials, check that you are connected to the home network and that you are using the correct local IP address for admin access. Ensure your browser isn’t using cached credentials, and try a different device to rule out client-side issues. If the problem persists, reboot the router, perform a soft reset, or review the wiring if you are using a modem in bridged mode. In some cases, your ISP-provided unit may have additional restrictions or shared credentials.
Common router default credentials and access points
| Aspect | Details | Typical Value |
|---|---|---|
| Default Username | Depends on model/firmware; often 'admin' | admin |
| Default Password | Depends on model/firmware; varies | admin or password |
| Default Admin IP | Common login addresses | 192.168.0.1 or 192.168.1.1 |
| Login URL | Browser-based admin access | http://<IP> |
Your Questions Answered
What is the default username and password for Excitel routers?
Default credentials vary by model; check the router label or manual for exact values. If you cannot locate them, contact Excitel support. Do not rely on memory or assumptions.
Default credentials differ by model; verify with the device label or manual, and contact support if needed.
Where can I find the default password for my model?
Look at the router’s label on the device or refer to the user manual. You can also check the official Excitel support portal for model-specific details.
Check the router label or manual, or visit Excitel support for your exact model.
Is it safe to reset using the reset button?
Yes, but a reset restores factory defaults. You’ll need to set a new admin password and reconfigure settings after the reset.
Yes, but you’ll have to reconfigure after resetting.
What are best practices after changing the password?
Use a long, unique password; enable firmware updates; disable unused features; consider a separate guest network for visitors.
Use a strong password and keep firmware up to date.
What if I can't access the admin panel after changing the password?
Double-check the local IP, try another device, and clear browser cache. If needed, perform a controlled reset to regain access.
If you forget, you may need to reset the router to regain access.
Can I change the default password remotely?
Typically, changes require local network access. Some configurations may allow remote management with VPN or cloud features if enabled by your provider.
Usually you need local access; remote changes depend on setup.
“Default credentials are a weak link in home networks; changing them promptly and following best practices dramatically reduces the risk of unauthorized access.”
Key Takeaways
- Identify the exact default login from your model's label to avoid guessing.
- Change the password immediately after setup.
- Use a strong, unique password for admin access.
- Enable firmware updates and strong wireless security.
- Document credentials securely for future references.
